A16H1208SSLP - 

Applications:
For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure's seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants.

Specifications:

14-Gauge Type 304 or 316L Stainless Steel Bodies and Doors

Seams Continuously Welded and Ground Smooth

Seamless Foam-in-Place Gasket

Rolled Lip Around Three Sides of Door

Stainless Steel Door Clamp Assembly

Hasp and Staple for Padlocking

Door Removed by Pulling Stainless Steel Continuous Hinge Pin

Data Pocket is High-Impact Thermoplastic

Collar Studs Provided for Mounting Optional Panels

Exterior Hardware on Type 316L Stainless Steel Enclosures Matches Enclosure Material

Bonding Provision on Door; Grounding Stud on Body

Finish:
Door, sides, top and bottomr have smooth #4 brushed finish.

Industry Standards:

UL 508A Listed; Type 3R, 4, 4X, 12; File No. E61997

cUL Listed per CSA C22.2 No. 94; Type 3R, 4, 4X, 12; File No. E61997

NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13

CSA File No. 42186; Type 4, 4X, 12

IEC 60529, IP66

Meets NEMA Type 3RX Requirements