4312G -

Fan; DC; 12V; 119x119x32mm; Sq; 97.7CFM; 43dBA; 4W; 3000RPM; Leadwires

聲明：圖片僅供參考，請以實物為準！

訂購熱線： 400-900-3095 0755-21000796, QQ:800152669, Email:sales@szcwdz.com

由于產品數據庫龐大，部分產品信息可能未能及時更新，下單前請與銷售人員確認好實時在庫數量，謝謝合作！

Highlights:

Ball bearings and sleeve bearings available.

General Characteristics:

Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.

Fully integrated electronic commutation.

Protected against reverse polarity and blocking.

Electrical connection via single leads AWG 22, TR 64. Stripped and tinned ends.

Blowing over struts. Rotational direction CCW looking at rotor.

Mass: 230 g.

Air Flow	97.7 CFM (2767 L/Min.)
Bearing Type	Sleeve
Brand/Series	4300N Series
Configuration	Square
Current Rating	0.15 A
Dimensions	4.69 x 4.69 x 1.26 In. (119 x 119 x 32 mm)
Direction	Exhaust over Struts
Fan Type	DC
Material	Plastic
Noise Level	43 dBA
Power Rating	4
Primary Type	Fans
Rotation	CCW
Size	4.69 x 1.26 (119 x 32) In. (mm)
Size, Approximate	4.7 x 4.7 In. (119 x 119 mm)
Speed	3000 RPM
Temperature, Operating, Maximum	70 °C
Temperature, Operating, Minimum	-20 °C
Termination	Wire Leads
Thickness, Approximate	1.3 In. (32 mm)
Type	Square
Voltage Rating	12 VDC
Weight	230 g
關鍵詞